TECHNICAL SPECIFICATIONS
Conductor type of connectable cable |
Aerial bundled cable cross section |
Branch cable cross section |
Copper (Cu) |
1.5-70 mm2 |
1.5-70 mm2 |
Aluminum (Al) |
16-95 mm2 |
10-95 mm2 |
PARTS AND COMPONENTS
Exterior body: Corrosion resistant aluminum alloy with tin coating
Cover: UV and weather resistant polypropylene plastic
Restraint plate: Stainless steel
Bolt: M8 Galvanized steel bolt
Nut: Extruded aluminum
Rubber Pellet: UV and weather resistant rubber materials
INSTALLATION METHOD
First, unscrew the shear off nut and cut the cable passage relative to the cross section of the cable, then place the cable in the cable holder and separate the base and the insulated upper shell. Place the aerial bundled cable on the teeth. Insert the branch conductor wire from the desired side through the insulated upper shell up to the end of the cable end cap. Then place the insulated upper shell on the base and fasten the shear off nut with 13 mm wrench until the top nut is broken and dropped down. This will ensure that the connector teeth are sufficiently attached to the cable. To prevent rotating the connector while tightening the bolt, fork spanner can be used in retaining groove designed in the cover.
PACKAGING
50 PCS/CTN
Reviews
There are no reviews yet.