APPLICATION
- This joint is used for electrical-mechanical connection of two aluminum conductors.
APPLICATION
TECHNICAL SPECIFICATIONS
Cross section of connectable conductive cable | 16- 25 – 35 – 50 – 70 – 95 mm |
PARTS AND COMPONENTS
Body | UV and weather resistant fiber reinforced polyamide materials |
Joint tube | Resistant aluminum alloy |
Washers | UV resistant plastic |
INSTALLATION METHOD
First, separate the aluminum tube from the inside of the joint and insert the polyamide tube into the aerial bundled cable with the washers. Then, strip the cable to half the length of the aluminum tube. Do the same for other connectable aerial bundled cables. After that, insert the two stripped ends of the cable into the aluminum tube from both sides so that each one fills 50% of the length. Crimping tool can be used for tube pressing. Make sure that the pressing operation is done carefully and firmly. Then, insert the polyamide tube into the pressed tube and insert the washers into the joint on both sides.
Then cable washing brush may be used to press the tube. Note that the pressing works shall be made carefully and strongly. Then insert the polyamide tube into the pressed tube and insert the washers into the joint from both ends.
PACKAGING
150 CANS/CTN
Reviews
There are no reviews yet.