فارسی

Utility Networks Offers Accessories and Solution

Polyamide LP Tensile Clamp (Utility Networks Offers)     Code : DCL10 , DCL11

Application
This clamp is applied to be used in the ending of the network and angles steeper than 90 degrees. In order to do so, the tensile clamp is used together with the pigtail bolt in the ending leg.
Technical Specifications:
Networks utility offers messenger cross section area 25-50 mm2
ماکزیمم اعمال نیروی کشش 15 KN

Parts and Components:
Body : Of filament polyamide quality resistant against UV
Wedge : It is composed of two tongue and groove parts, which moves sliding inside the body and is of polyamide quality resistant against UV
Wire rope or wire : Of galvanized or stainless steel quality with quite high tensile strength. The wire rope is braced in the clamp body by rivets. Meanwhile, the plastic protector is placed in the center of the wire rope arch to enable more lifetime and local stability for the clamp in the wire rope connection position to the pigtail hook. The wire rope is of steel type with de-chromate tempering (approx. 70cm) and connecting the same to the clamp is of bolt and nut tempered method. connection position to the pigtail hook. The wire rope is of steel type with de-chromate tempering (approx. 70cm) and connecting the same to the clamp is of bolt and nut tempered method.
   
   
Installation Method :

First of all take the clamp wedges out from the body outwardly to enable placement of the relevant messenger inside the same. Then return the wedges into the body through pressing. After that pass the wire rope or wire through the pigtail hook and then finish the assembling. Of the advantages of this clamp is that it does not need any tool for installation operator.

Packaging :

15 clamps/carton

Rahshad Electric Co, All Rights Reserved.Design By Moballeghan Group.