فارسی

Utility Networks Offers Accessories and Solution

Aluminium Die-cast LP Tensile Clamp (Utility Networks Offers))     Code : DCL13 - 16

Application
This clamp is applied to be used in the ending of the network and angles steeper than 90 degrees or bigger than 180 degrees. Using other clamps for these angles results in cable fatigue in the position of the angle. In order to do so, the tensile clamp is used together with the pigtail bolt in the ending leg.
Technical Specifications :
Maximum tensile application KN Secton area Messenger type Network utility messenger section area ( mm2 ) Mechanical connection type Product code
18 25 Steel 16-35 Wire DCL13
14 35 Aluminium
18 25 Steel 16-35 Wire rope DCL14
14 35 Aluminium
15 50 Steel 50-70 Wire DCL15
20 70 Aluminium
15 50 Steel 50-70 Wire rope DCL16
20 70 Aluminium

Parts and Components :
Body : Of integrated aluminium with special alloy to increase tensile strength
Wedge : It is composed of two tongue and groove parts, which moves sliding inside the body and is of polyamide quality resistant against UV
Wire rope or wire : Of galvanized or stainless steel quality with quite high tensile strength. The wire rope is braced in the clamp body by rivets. Meanwhile, the plastic protector is placed in the center of the wire rope arch to enable more lifetime and local stability for the clamp in the wire rope connection position to the pigtail hook. The wire rope is of steel type with de-chromate tempering (approx. 70cm) and connecting the same to the clamp is of bolt and nut tempered method.
Installation Method :

First of all take the clamp wedges out from the body outwardly to enable placement of the relevant messenger inside the same. Then return the wedges into the body through pressing. Now based on the type of clamp brace, i.e. either wire rope or wire, connect the braced to the pigtail bolt. Regarding the wire, connecting pigtail bolt in the plastic place of wire is mandatory, concerning the wire rope bracing, ensuring the fitting of the wire rope ending bolt to the clamp is mandatory.

Packaging :

15 clamps/carton

Rahshad Electric Co, All Rights Reserved.Design By Moballeghan Group.