فارسی

Utility Networks Offers Accessories and Solution

Single Bolt Aluminium Clamp (Utility Networks Offers)     Code : PGC10

Application
This connector is usually used in the beginning of the networks utility offers lines through establishing sub lines by using wire networks.
Technical Specifications:
Model Cross section are of aluminium cable for the main and sub splits Other features
PGC10 AL 25-120 Single bolt

Parts and Components:
Plastic body : With two upper and lower parts resistant against UV and different climatic conditions
Main conducting metal : Resistant aluminium alloy which may be tempered using copper and tan to improve resistant against corrosion and different climatic conditions
Bolt, nut and washer : Steel with de-chromate tempering
Installation Method:

First of all cut the plastic body I/O portals using cuter considering the copper and aluminium cables cross sections. After removing the coating of the utility networks offers, take out the lower body locking projections from the place existed on the upper body pressing downwardly. Therefore, the connecting plastic body is opened but is not separated by an arrow-shaped bracing, which facilitates the works for the wireman. After that take out the main conducting metal out of the plastic body and open the upper bolts by using wrench appropriate thereto anticlockwise and carefully clean all the connecting wire brush. After that smear the connecting points with anti-moisture grease; Then considering the aluminium or copper quality, choose the special place to embed the cable. The length of the cable embedded in the connector shall not be less than 50% of the seat. Then we tight the main conducting metal bolts. The plastic body upper and lower parts are placed on up and down of the main conducting metal and further place the lower part locking projection in the place provided on the upper body. Eventually, we brace the connector in a certain way that minimum water penetration is possible upon rain and snow. Using LP insulation gloves during the entire installation stages is mandatory.

Packaging with plastic cover:

60 pcs/carton of PGC10 with cover

Packaging without plastic cover:

110 pcs/carton of PGC10

Rahshad Electric Co, All Rights Reserved.Design By Moballeghan Group.