فارسی

Utility Networks Offers Accessories and Solution

Utility lighting Split Connector (Utility Networks Offers)     Code: IPL21

Application
This connector is used to establish LP split of the paths’ lighting cable from utility networks offers and is of bi-metal type.
This connector may be connected to aluminium and copper cables (in both main and sub states).
There is no need to peel the coating of the cable for installation of split (in both with and without power flow).
Technical Specifications:
Utility networks offers cross-section area Split cable cross-section area Conducting type of connectable cable
10-95 mm2 1.5-10 mm2 Aluminium-copper

Parts and Components:
Exterior body: Exterior body parts (original) include two parts (base and cap), made from fibered polyamide materials resistant against UV and various climatic conditions
Conducting metal (fork): Of tempered conductive alloy metal type (type of alloy metal and tempering may be customized).
Fork washer: Of PVC materials type (resistant against UV and various climatic conditions) smeared with anti-moisture grease
Bolt: Bolt of M6 steel type with hot galvanized tempering and two-end wrenching type (cutting)
Nut and washer: Of alloyed metal and two-end wrenching type (cutting)
Installation Method:

First of all open the connector nut and separate the two parts of base and cap. Place utility networks offers on the fork. Insert the split conductive wire into the PVC washer up to the end. Then place the cap on the base and fasten the nut. Wrench box size 10 shall be used from the upper wrenching position of the nut to fasten the same so that the upper nut is cut and complete connection between connection and utility conductor is established.

Packaging:

192 connectors/carton

Rahshad Electric Co, All Rights Reserved.Design By Moballeghan Group.