فارسی

Utility Networks Offers Accessories and Solution

Utility Subscribers Split Connector (Utility Networks Offers), with torque-meter nut     Code: IPC13

Application
This connector is used to establish LP split of the subscribers’ cable from utility networks offers and is of bi-metal type.
This connector may be connected to aluminium and copper cables (in both main and sub states).
There is no need to peel the coating of the cable for installation of split (in both with and without power flow).
Technical Specifications:
Code Utility networks offers cross-section area Split cable cross-section area Conducting type of connectable cable Bearing bolt torque Nut specifications
IPC13 25-95 mm2 6-35 mm2 Aluminium-copper 14Nm Torque-metered nut

Parts and Components:
Exterior body: Exterior body parts (original) include two parts (base and cap), made from fibered polyamide materials resistant against UV and various climatic conditions.
Conducting metal (fork): Of tempered conductive alloy metal type (type of alloy metal and tempering may be customized).
Fork washer: Of rubber materials type (resistant against UV and various climatic conditions) smeared with anti-moisture grease
Bolt: Bolt of M8 steel type with galvanized tempering type and assorted wrench No. 13
Nut and washer: Of steel type with galvanized tempering type
Installation Method:

First of all open the connector nut and separate base and cap. Place utility networks offers on the fork. Insert the split conductive wire from the desirable side through the cap position up to the end of the additional caps. Then place the cap on the base and fasten the nut to establish the complete connection of connector or conductor of the split. Wrench box size 18 may be used upon fastening the nut to prevent rotating the connector, and place the same in the gearbox part.

Packaging:

120 connectors/carton

Rahshad Electric Co, All Rights Reserved.Design By Moballeghan Group.